Home / Blog /

GaSb( Gallium Antimonide) wafer

Blog

GaSb( Gallium Antimonide) wafer

2018-01-19

PAM-XIAMEN grows high quality Gallium Antimonide (GaSb) single crystal ingots.

We also round, saw cut, lap and polish GaSb wafers and can supply an epi-ready surface quality.

GaSb crystal is a compound formed by 6N pure Ga and Sb element and is grown by Liquid Encapsulated Czochralski ( LEC ) method with EPD < 1000 cm -3 . GaSb crystal has high uniformity of electrical parameters and low defect density , suitable for MBE or MOCVD epitaxial growth .

We have "epi ready " GaSb products with wide choice in exact or off orientation , low or high doped concentration and good surface finish . Please contact us for more product information .

1)2",3"GaSb wafer

Orientation:(100)±0.5°

Thickness(μm):500±25;600±25

Type/Dopant:P/undoped;P/Si;P/Zn

Nc(cm-3):(1~2)E17

Mobility(cm2/V ·s):600~700

Growth Method:CZ

Polish:SSP

2)2"GaSb wafer

Orientation:(100)±0.5°

Thickness(μm):500±25;600±25

Type/Dopant:N/undoped;P/Te

Nc(cm-3):(1~5)E17

Mobility(cm2/V ·s):2500~3500

Growth Method:LEC

Polish:SSP

3)2"GaSb wafer

Orientation:(111)A±0.5°

Thickness(μm):500±25

Type/Dopant:N/Te;P/Zn

Nc(cm-3):(1~5)E17

Mobility(cm2/V ·s):2500~3500;200~500

Growth Method:LEC

Polish:SSP

4)2"GaSb wafer

Orientation:(111)B±0.5°

Thickness(μm):500±25;450±25

Type/Dopant:N/Te;P/Zn

Nc(cm-3):(1~5)E17

Mobility(cm2/V ·s):2500~3500;200~500

Growth Method:LEC

Polish:SSP

5)2"GaSb wafer

Orientation:(111)B 2deg.off

Thickness(μm):500±25

Type/Dopant:N/Te;P/Zn

Nc(cm-3):(1~5)E17

Mobility(cm2/V ·s):2500~3500;200~500

Growth Method:LEC

Polish:SSP


Relative products:

InAs wafer

InSb wafer

InP wafer

GaAs wafer

GaSb wafer

GaP wafer

GaSb material presents interesting properties for single junction thermophotovoltaic (TPV) devices. GaSb: Te single crystal grown with Czochralski (Cz) or modified Czo- chralski (Mo-Cz) methods are presented and the problem of Te homogeneity discussed. As the carrier mobility is one of the key points for the bulk crystal, Hall measurements are carried out. We present here some complementary developments based on the material processing point of view: the bulk crystal growth, the wafer preparation, and the wafer etching. Subsequent steps after these are related to the p / no r n/p junction elaboration. Some results obtained for different thin-layer elaboration approaches are presented. So from the simple vapor phase diffusion process or the liquid phase epitaxy process up to the metal organic chemical vapor deposition process we report some material specificity. DOI: 10.1115/1.2734570


For more information, please visit our website:http://www.semiconductorwafers.net,

send us email at angel.ye@powerwaywafer.com or powerwaymaterial@gmail.com.

Contact Us

If you would like a quotation or more information about our products, please leave us a message, will reply you as soon as possible.
   
Contact Us Contact Us 
If you would like a quotation or more information about our products, please leave us a message, will reply you as soon as possible.