Ion beam irradiation has been examined as a method for creating nanoscale semiconductor pillar and cone structures, but has the drawback of inaccurate nanostructure placement. We report on a method for creating and templating nanoscale InAs spikes by focused ion beam (FIB) irradiation of both homoepitaxial InAs films and heteroepitaxial InAs on InP substrates. These 'nanospikes' are created as In ...
To realize high-performance silicon carbide (SiC) power devices, low-resistance ohmic contacts to p-type SiC must be developed. To reduce the ohmic contact resistance, reduction of the barrier height at metal/SiC interfaces or increase in the doping concentration in the SiC substrates is needed. Since the reduction of barrier height is extremely difficult, the increase in the Al doping concentrati...
In this paper, using a fully-coupled, three-dimensional electro-thermal device simulator, we study the mechanism of efficiency degradation at high current operation in planar GaN-based light emitting diodes (LED). In particular, the improvement of the efficiency degradation using thicker conductive GaN substrates has been demonstrated. First, it is found that local Joule heating inside thin conduc...
The bonding-temperature-dependent lasing characteristics of 1.5 a µm GaInAsP laser diode (LD) grown on a directly bonded InP substrate or Si substrate were successfully obtained. We have fabricated the InP substrate or Si substrate using a direct hydrophilic wafer bonding technique at bonding temperatures of 350, 400, and 450 °C, and deposited GaInAsP or InP double heterostructure layers on this I...